Authorised Castrol Distributor (Andhra Pradesh) — Vasundhara Specialities

Castrol Anvol Fire-Resistant Hydraulic Fluids for AP & South India — Anvol SWX 46 Polyolester + Anvol WG 46 Water-Glycol

Vasundhara Specialities — Authorised Castrol Distributor (Andhra Pradesh), supplying Hyderabad — offers the Castrol Anvol fire-resistant hydraulic fluid range across Andhra Pradesh and Telangana. Anvol SWX 46 (polyolester HFDU, rated to 500 bar, Factory Mutual Category 1) and Anvol WG 46 (water-glycol HFC, rated to 200 bar, for foundries and steel mills). Per ISO 12922 HFDU and HFC classifications. For foundries, steel mills, glass plants and other hydraulic systems in line-of-sight to molten metal or open flame. Hyderabad and Telangana orders dispatch from our IDA Mallapur warehouse in Hyderabad; Andhra Pradesh orders from Bhimavaram.

Quick Answer

Castrol Anvol fire-resistant hydraulic fluids — Anvol SWX 46 (water-free polyolester HFDU for high-pressure systems to 500 bar, Factory Mutual Category 1) and Anvol WG 46 (water-glycol HFC to 200 bar, the foundry and steel-mill grade). Per ISO 12922 HFDU and HFC standards. Vasundhara Specialities supplies the full Anvol range across AP and Telangana for foundries, steel mills and other hydraulic systems where conventional mineral oil presents fire risk.

Castrol 210 L industrial barrel — Anvol fire-resistant hydraulic fluids supplied to Hyderabad in 20 L pails and 210 L barrels by authorised Castrol distributor (AP) foundries
Genuine Castrol pack — supplied by Vasundhara Specialities, authorised Castrol Industrial distributor

The fire-resistant hydraulic fluid for foundries and steel mills

Castrol Anvol is a fire-resistant hydraulic fluid range for systems near molten metal, open flame or other high fire risk, where conventional mineral oil presents unacceptable insurance and HSE risk. The chemistry split matters. Anvol SWX 46 is a water-free polyolester (ISO 12922 HFDU) that Castrol rates to 500 bar with anti-wear protection comparable to a standard mineral oil — it is the grade for high-pressure mill hydraulics, and it is the one that carries Factory Mutual Category 1. Anvol WG 46 is a water-glycol (ISO 12922 HFC) rated to 200 bar; the water fraction is what gives water-glycol its fire performance, and Castrol lists WG 46 as suitable for foundries and steel mills; typical positions include pour-deck hydraulics and ladle-tilt actuators. Seal compatibility is where fire-resistant changeovers go wrong: confirm the elastomer specification against the product data sheet before the fluid goes in, and treat a seal spec written for a different fire-resistant chemistry as unverified. For Visakhapatnam mill-stand and mould-oscillation hydraulics, we supply both grades across AP and Telangana with water-content checks on the HFC (laboratory testing through our group's partner laboratory) and seal-compatibility review on the changeover. Castrol India's Anvol fire-resistant fluid portfolio covers two ISO 12922 classes: HFC (WG 46) and HFDU (SWX 46).

Castrol Anvol Fire-Resistant Fluids Range

Grades we supply in the Castrol Anvol fire-resistant fluids range.

Anvol SWX 46 — Polyolester, ISO 12922 HFDU

Water-free polyolester fire-resistant hydraulic fluid, ISO VG 46, viscosity index 180, with anti-wear additives. Castrol rates it for high-pressure hydraulic systems up to 500 bar (7,200 psi) in mills, with a very high flash point and anti-wear protection comparable with standard mineral oils. Anvol SWX 46 fulfils the requirements of Factory Mutual Category 1. Anvol PE (HFDR) is not in the current Castrol India catalogue; Anvol SWX 46 (HFDU) is the current high-pressure anhydrous option, subject to a fire-risk and insurer review.

Anvol WG 46 — Water-Glycol, ISO 12922 HFC

Water-glycol fire-resistant hydraulic fluid, ISO VG 46, viscosity index above 200, with good anti-wear properties. Castrol rates it for pressures up to 200 bar and specifies it for foundries and steel mills. The water fraction is integral to the fire resistance, so it has to be monitored and maintained in service.

Standard Mineral (alternative for low-fire-risk)

Where the fire-risk assessment shows conventional mineral hydraulic oil is acceptable, Castrol Hyspin AWH may be a more cost-effective choice — see our Hyspin page. Anvol is specifically for service where mineral cannot be used.

Technical Specifications

Standard property values across the range. TDS / MSDS / per-batch COA available on enquiry.

PropertyAnvol SWX 46Anvol WG 46
Fluid typePolyolester, water-freeGlycol and water
ISO 12922 classHFDUHFC
Viscosity at 40°C (mm²/s)4646
Viscosity index180above 200
Anti-wear additivesYesYes
Maximum system pressure500 bar / 7,200 psi200 bar
Fire-resistance requirement metFactory Mutual Category 1—
Typical serviceHigh-pressure hydraulics in millsFoundries and steel mills

Standards: ISO 12922 HFDU (SWX 46) and HFC (WG 46). Factory Mutual Category 1 applies to Anvol SWX 46 — if an insurer or an FM Global schedule names a fire-resistant class or an approved fluid, confirm the certificate against the grade you are actually running. Figures above are from Castrol's India industrial product catalogue; only the properties stated on the individual product data sheet are binding, and we will send the current data sheet on request.

Moving from Anvol PE to Anvol SWX 46

Anvol PE was a phosphate-ester fluid (ISO 12922 HFDR). It is no longer part of Castrol's India industrial range. Plants still running it need a route out, and the replacement for its high-pressure role is Anvol SWX 46 — a polyolester HFDU rated to 500 bar and meeting Factory Mutual Category 1.

Both fluids are water-free, so the pressure capability carries over; the fire-resistance class does not (HFDR and HFDU are different ISO 12922 classes), so the fire-risk assessment and the insurer must accept the change. What changes is the base chemistry, and that is where the changeover work sits:

Seals and hoses. Phosphate esters and polyol esters do not behave the same way with elastomers. A seal specification that was written for Anvol PE does not transfer to SWX 46 — it has to be confirmed against the SWX 46 data sheet before the fluid goes in. This is the single most common way a fire-resistant changeover goes wrong.

Paints, coatings and filter media. Reservoir internal coatings and filter elements selected for phosphate ester should be checked the same way.

Flushing. Drain, flush and verify residual old fluid is below what the data sheet permits. Do not top up a phosphate-ester charge with SWX 46 and expect the mixture to behave as either fluid.

The fire class on paper changes. Anvol PE was HFDR; Anvol SWX 46 is HFDU. Both are ISO 12922 fire-resistant classes, but if your insurer, your FM Global schedule or an OEM hydraulic-system specification names the class explicitly, that document needs re-issuing against HFDU.

Consider whether you still need an anhydrous fluid at all. If the system runs below 200 bar and sits in line-of-sight to molten metal, Anvol WG 46 may be the better answer: the water fraction gives water-glycol its fire performance, and Castrol specifies WG 46 for exactly that foundry and steel-mill duty.

Send us the system pressure, the reservoir temperature, the seal material and the current fluid, and we will come back with the grade and the changeover steps in writing.

Application Areas by Industry

Where Castrol Anvol fire-resistant fluids are used — by industry segment and application.

Iron & Steel Foundries

Anvol WG 46 for foundry pour-deck hydraulics, ladle-tilt actuators and mould-handling press hydraulics. Castrol specifies WG 46 for foundry duty, and the water fraction is what carries the fire performance in a leak.

Steel Rolling Mills

Anvol WG 46 for hot-strip-mill stand hydraulics and continuous-caster mould-oscillation hydraulics, which Castrol names as steel-mill service. Anvol SWX 46 where system pressure runs above the 200 bar WG 46 is rated for.

Glass Plants — Container & Float

Anvol WG 46 for IS-machine plunger hydraulics, gathering-station hydraulics. Where the fire-risk assessment rules out mineral oil near the melt, WG 46 is an option.

Aluminium Smelter & Casting

For aluminium casthouses, choose between Anvol WG 46 and Anvol SWX 46 after a site fire- and explosion-risk review.

📍

Visit Us: Bhimavaram, Andhra Pradesh | Authorised Castrol Distributor (Andhra Pradesh), supplying Telangana | Other states on special order.

Frequently Asked Questions

Common questions from maintenance and procurement buyers sourcing Castrol Anvol Fire-Resistant Fluids through Vasundhara Specialities.

Which Anvol grade for an iron-foundry pour-deck hydraulic system?

Anvol WG 46. Castrol specifies this water-glycol grade for foundries and steel mills, and the water fraction is what suppresses fire propagation in a leak onto hot metal. It is ISO VG 46 and rated to 200 bar. Confirm the seal and hose materials against the product data sheet before changing over from mineral oil, and plan for water-content monitoring once it is in service.

When should I use Anvol SWX 46 instead of Anvol WG 46?

Pressure is the clearest divider. Castrol rates Anvol WG 46 to 200 bar and Anvol SWX 46 to 500 bar, so anything above 200 bar goes to SWX 46. SWX 46 is also the answer where a water-containing fluid is unacceptable, and where the anti-wear performance needs to be comparable with a standard mineral oil. Anvol WG 46 is the choice for foundry and steel-mill duty inside its pressure range, which is the service Castrol names for it. If an insurance schedule requires Factory Mutual Category 1, Castrol states SWX 46 fulfils those requirements — confirm the certificate.

What happened to Anvol PE, and what replaces it?

Anvol PE was a phosphate-ester fluid, ISO 12922 class HFDR. It is no longer part of Castrol's India industrial range. For its high-pressure role the replacement is Anvol SWX 46, a water-free polyolester rated to 500 bar that meets Factory Mutual Category 1. Both are anhydrous, so the pressure capability carries over, but the base chemistry changes and the seal, hose, coating and filter specification has to be re-confirmed against the SWX 46 data sheet rather than inherited from the PE specification. Flush rather than top up. If the system runs below 200 bar and sits in line-of-sight to molten metal, Anvol WG 46 may suit it better.

What is the maximum operating temperature for Anvol WG 46?

Water-glycol fluids lose water faster as bulk temperature rises, so the working limit is set by how much water loss the system can tolerate between checks rather than by a single headline number. Take the maximum continuous temperature from the Anvol WG 46 product data sheet and treat it as binding. Where reservoir temperature is high enough that water loss becomes the governing maintenance item, the water-free Anvol SWX 46 removes that problem entirely — which, along with pressure, is the usual reason to move off a water-glycol.

How is water content maintained in Anvol WG 46 during operation?

Water content drifts down through evaporation and through reservoir breathing, and the fire resistance goes with it — which is why this is the one maintenance item a water-glycol cannot be left without. Sample on a regular interval, compare against the water content the Anvol WG 46 data sheet specifies, and top up with deionised water to bring it back into range. Vasundhara Specialities supports periodic water-content sampling as part of the supply relationship, and we will set the interval with you against your reservoir temperature and duty cycle.

Which Anvol fluid meets Factory Mutual Category 1 requirements?

Anvol SWX 46. Castrol states that Anvol SWX 46 fulfils the requirements of Factory Mutual Category 1. If your property insurer, your FM Global schedule or an OEM hydraulic specification calls for an FM Category 1 fluid, SWX 46 is the grade Castrol states meets those requirements, and we will supply the current product data sheet and batch documentation on request. Do not carry an approval across from a fluid you used to run — the certificate has to name the grade actually in the system.

Can Anvol be supplied for emergency hydraulic-fluid replacement?

Anvol WG 46 and Anvol SWX 46 are specialty grades, normally indented from Castrol India; the dispatch date is confirmed on the quotation. For an urgent replacement, send us the grade, quantity and site and we will reply in writing within 24 hours on working days.

Can Vasundhara Specialities supply Castrol Anvol to Hyderabad and across South India?

Yes. Vasundhara Specialities Private Limited is an authorised Castrol Industrial distributor (Andhra Pradesh), supplying Hyderabad and Telangana from our IDA Mallapur warehouse, Andhra Pradesh from Bhimavaram, and other states on special order. Genuine Castrol Anvol fluids; COA, TDS and MSDS supplied on request. For the full Castrol industrial range we supply see our Castrol catalogue.

How does Castrol Anvol compare to Quaker Houghton Houghtosafe or Quintolubric fire-resistant fluids?

They compete in the same ISO 12922 fire-resistant classes. Water-glycol HFC fluids such as Anvol WG 46 derive fire resistance from their water content. HFDU fluids such as Anvol SWX 46 offer higher pressure capability; compare any other maker's grade on its own data sheet. Approvals such as FM and OEM listings vary grade by grade, so selection is always confirmed against current product datasheets. Switching between classes needs a managed flush; we advise on compatibility and changeover procedure.

Related Castrol Industrial

Full Castrol industrial range supplied by Vasundhara Specialities.

Ready to Order Castrol Anvol Fire-Resistant Fluids?

Send us your requirement, pack size and quantity — quote returned within 24 hours on working days.

Request Quote WhatsApp Us

Hyderabad & Telangana buyers

We supply Telangana customers directly from our IDA Mallapur warehouse in Hyderabad — genuine Castrol packs; batch COA, TDS and MSDS supplied on request. For Hyderabad-local service and multi-brand industrial supply, our Vasundhara Group company Vasundhara Performance Solutions is based in Hyderabad.