📍
Visit Us: Bhimavaram, Andhra Pradesh | Authorised Castrol Distributor (Andhra Pradesh), supplying Telangana | Other states on special order.
Frequently Asked Questions
Common questions from maintenance + procurement buyers sourcing Castrol Aircol Compressor Oils through Vasundhara Specialities.
Which Aircol grade for an Atlas Copco rotary-screw compressor at 8 bar in Hyderabad ambient?
For Atlas Copco rotary-screw compressors at 8 bar discharge in Hyderabad's 30-42°C ambient: a mineral Aircol CM grade may be used where the Atlas Copco lubricant chart permits, with the grade confirmed against the compressor duty and the drain interval taken from the Atlas Copco service schedule. Where the duty is high-uptime, or the compressor room runs hot, Aircol SR 46 PAO synthetic holds condition longer between drains. Always cross-check the specific Atlas Copco model's OEM lubricant chart — some models specifically require synthetic from new.
Difference between Aircol CM and Aircol SR — when does the synthetic premium pay back?
Aircol CM is mineral; Aircol SR is PAO synthetic. SR holds condition materially longer between drains and tolerates higher discharge temperatures. Synthetic premium pays back when: (1) drain interval is the operational bottleneck, (2) compressor sees high discharge temperatures consistently, (3) oil-mist downstream contamination is an HSE / product-quality concern. For general-industrial service on a standard drain interval, mineral Aircol CM is cost-effective.
What is the typical drain interval for Aircol SR in pharma compressed-air service?
Take the interval from the compressor OEM schedule and let oil analysis confirm or extend it. Discharge temperature, filtration and duty cycle move the real figure far more than the grade does: a pharma compressed-air system with good filtration and a stable oil temperature will run Aircol SR well past a hot, poorly filtered installation on the same oil. Trending TAN, viscosity drift and water content is what tells you which case you are in, and Vasundhara Specialities supports periodic sample analysis as part of the supply relationship.
Is Aircol CM compatible with existing Mobil Rarus, Shell Corena, or Total Dacnis lubricant?
Avoid mixing brands as a routine top-up: additive chemistries differ, and we do not rely on brand-to-brand compatibility claims. For a changeover, drain and flush as the compressor maker recommends, then fill with Aircol. A move from a mineral oil to PAO Aircol SR is the right time for a full drain and flush; we can plan it with you.
Does Aircol carry food-grade NSF H1 certification for direct-contact compressed-air use?
Standard Aircol CM / SR / SN grades are NOT NSF H1 certified — they are industrial compressor oils. For applications where the compressor is in the food/pharma zone or compressed air may contact food product directly, use an NSF H1 registered compressor oil — ask us for the available option — see our Optileb page for the NSF H1 range. Aircol covers general industrial compressed-air; Optileb covers food-grade.
Can Aircol be used in vacuum pumps?
Aircol HV 100 is the Castrol vacuum-pump oil — a mineral oil with a narrow boiling range for mechanical fine and high vacuum pumps. Check the vacuum-pump OEM chart before changing oil. For standard rotary-vane industrial vacuum pumps, Aircol HV 100 is the correct choice. Cross-reference the specific OEM model.
What pack sizes are available for Aircol oils?
Standard pack sizes: 20L pail (sample/single-machine top-up), 210L drum (standard plant maintenance), 1000L IBC tote (bulk/high-volume), and bulk-tanker direct-to-tank for large installations. Pack availability per grade is confirmed on the quotation.
Can Vasundhara Specialities supply Aircol to Hyderabad and across South India?
Yes. Vasundhara Specialities Private Limited is an authorised Castrol Industrial distributor (Andhra Pradesh), supplying Hyderabad and Telangana from our IDA Mallapur warehouse, Andhra Pradesh from Bhimavaram, and other states on special order. Genuine Castrol Aircol products; COA, TDS and MSDS on request. For the full Castrol industrial range we supply see our Castrol catalogue.
How does Castrol Aircol compare to Fuchs Renolin compressor oils?
We do not claim equivalence between brands. Aircol CM is the mineral grade and Aircol SR the PAO synthetic grade in the Castrol range. Grade selection follows the compressor OEM's oil specification, discharge temperature and drain-interval target rather than the brand name, and compatibility on changeover follows the same rules as the Rarus and Corena question above. We map an existing Fuchs, Mobil or Shell fill to the correct Aircol grade through our cross-reference support, with sample analysis through our group's partner laboratory to validate the drain interval after the switch.