The Castrol India industrial range — from the brochure to your shop floor, delivered with expertise.
Mineral oil-based, ester/EP, and boron-free emulsion coolants for machining and grinding of cast iron, steel, aluminium alloys, aerospace alloys, and non-ferrous metals. Includes the advanced Hysol SL XBB series.
100% mineral oil-free, transparent solutions for general to heavy-duty machining and grinding. Boeing-approved aerospace grades (Syntilo 9828), boron-free options (Syntilo 2000), and ceramic/glass grinding specialists.
High-performance neat oils for honing, broaching, grinding, deep hole drilling, hobbing, and general machining. EHVI hydrocracked, ester-based, and renewable-resource Bio NC Plus technologies.
Comprehensive metal forming solutions for cold heading, deep drawing, tube pilgering, pipe drawing, aluminium fin blanking, and water-soluble cold rolling applications.
Solvent-based, oil-based, and VCI corrosion preventives. Extensive DW/DWX dewatering range for short-term to extra long-term indoor and outdoor protection of machined components.
Aqueous alkaline, semi-synthetic micro-emulsion, hydrocarbon, and maintenance cleaners for spray wash, dip, ultrasonic, high-pressure, and vacuum vapour degreasing applications.
Minimum Quantity Lubrication (MQL) bioalcohol-based neat oil for aluminium machining, and highly age-resistant dielectric fluids for electrical discharge machining (EDM) finishing and roughing.
Hardening oils with high thermal stability and constant quenching performance for construction steels, alloy steels, carburised and carbonitrided components. Includes soluble quenching oil for induction hardening.
Versatile multi-purpose cutting oils suitable for general machining of ferrous and non-ferrous metals. Also conform to HLP-D hydraulic oil specifications for dual-purpose use.
Mineral to full PAO and PAG synthetics with EP, PD (Plastic Deformation), and anti-wear technologies. For spur, bevel, worm, planetary gears, wind turbines, robot gearboxes, and sugar mill crushers.
R&O, anti-wear (HLP), zinc-free (Tribol HM 943), and high-VI hydraulic oils. Superclean variants for systems demanding ultra-low sludge and deposit formation. Complete ISO VG 10–220 range.
Polyolester (HFD-U) and water-glycol (HFC) fire-resistant types for hydraulic systems in steel mills, foundries and hot-processing environments. Anvol SWX 46 is rated to 500 bar and fulfils the requirements of Factory Mutual Category 1; Anvol WG 46 is the water-glycol grade, rated to 200 bar.
Anti-stick-slip slideway oils with excellent load-carrying capacity. Magna SW 68 and SW D 68 are listed at Cincinnati P47 and SW 220 at P50. Suitable for combined slideway/hydraulic/gear lubrication.
High-performance spindle oils including PAO synthetic (Alphasyn K 15), refined mineral (Magna 2), water-based spindle coolant (SF), and high-speed textile spindle lubricants.
Multi-purpose, high-performance, high-temperature, low-temperature, open gear, and lifetime greases. Lithium, calcium, polyurea, and silica-based thickeners covering −60°C to +230°C.
Premium mineral (CM), dicarboxylic acid ester (SN), and full PAO synthetic (SR) lubricants for reciprocating, rotary screw, multicellular, and vacuum pump compressors.
High-temperature ester and PG-based chain oils for furnace chains, varnishing ovens, conveyor systems, and E-coat lines. Operating temperatures up to +300°C.
Circulating oils suitable for steel-mill bearings, including MORGOIL™ roll-neck bearings and No-Twist™ rollers (grade per Castrol data sheet). Outstanding demulsibility, air release, and oxidation stability.
Low-ash gas engine oil (Duratec L, SAE 40) for biogas, landfill gas, and dual-fuel engines. High-viscosity-index heat transfer oil (Perfecto HT 5 D) for closed thermic fluid heaters up to 300°C.
Specialised lubricants for needle lubrication in sewing and knitting machines. Highly recommended for sinkers and cam boxes in textile manufacturing equipment.
Specialist assembly and lubrication pastes. Paste PL for pressurised sliding points from −40 to +450°C, White T for fretting corrosion prevention, and Paste MF for extreme temperatures up to +1100°C.
NSF-H1 registered, physiologically safe lubricants for food, alcohol, and tobacco industries. Includes greases (GR 823-2), PAO gear oils (GT series), and fully synthetic hydraulic oil (HY 68).
Heavy-duty open gear greases for all types of open gears, pinions, racks, drag-line excavators, and backhoes. Available in NLGI 0 and 00 grades for manual and automatic greasing systems.
Castrol Iloform RS 4060, a water-soluble oil designed for cold rolling; other rolling-mill requirements are matched to a Castrol grade on enquiry.
Turbine oils for gas, steam and combined-cycle turbines in power generation and co-generation plants.
Heavy-duty 15W-40 and 20W-40 diesel engine oils from API CF-4 to CK-4 for trucks, tippers, buses, earthmovers and gensets, in 210 L barrels.
Axle, transmission and hydraulic oils, greases and ready-to-use coolants for haul trucks, loaders, excavators and quarry plant, in barrels.
Each Castrol industrial brand family has a dedicated page covering full range, ISO/DIN/AGMA specs, application areas, FAQs, and Hyderabad-area dispatch. Click any brand below for the deep-dive.
Comparing quotes? Read the lubricant procurement TCO framework, or use our technical services for cross-referencing of your current grades.