Castrol Aircol SR 68 — Synthetic Rotary Screw Compressor Oil

PAO synthetic for oil-flooded rotary screw air compressors, ISO VG 68. DIN 51506 VDL; ISO 6743-3 DAG/DAH/DAJ. Supplied across Andhra Pradesh and Telangana.

Request a QuoteWhatsAppPacks: 20 L packs

What Aircol SR 68 is

Castrol Aircol SR 68 is a polyalphaolefin (PAO) synthetic compressor oil for oil-flooded rotary screw compressors, including units running very high air discharge temperatures. It is ester-free, which avoids the corrosive acids esters can form.

Castrol rates it for oil service life of typically up to 8,000 hours in most systems, depending on the operating environment, with a very low tendency to form deposits — which also extends filter and separator life.

Typical properties

PropertyMethodTypical value
ISO viscosity grade—68
Density at 15 °CISO 121850.84 g/ml
Kinematic viscosity at 40 °CISO 310468 mm²/s
Kinematic viscosity at 100 °CISO 310410.7 mm²/s
Pour pointISO 3016−54 °C
Flash point, open cupISO 2592264 °C
RPVOTASTM D22723,000 min
FZG failure stageISO 14635-19
Rust test, synthetic sea waterASTM D665BPass

Source: Castrol Aircol SR range product data sheet (June 2025). Typical values, not a specification.

Classifications and requirements met

Where it is used

Aircol SR 68 or SR 46?

Use the compressor maker’s recommendation. The Castrol India catalogue lists the SR range at VG 32 and 46 for air and screw compressors, and VG 68 and 100 for multicellular compressors; VG 68 is used where the compressor maker specifies it. Changing over from a mineral compressor oil to Aircol SR is straightforward because PAO is compatible with mineral oils and common seals — drain fully and replace the filter. See Aircol SR 46.

Packs and supply

20 L packs. Batch COA, TDS and MSDS are supplied with every order on request; we confirm the grade against your compressor model before quoting.

Frequently Asked Questions

How long does Aircol SR 68 last in a screw compressor?

Castrol gives oil service life of typically up to 8,000 hours in most systems at normal operating conditions, depending on the environment. Oil analysis tells you when your unit actually needs a change.

Can I switch from mineral compressor oil to Aircol SR 68?

Yes. Castrol notes PAO is compatible with mineral-oil lubricants and the usual seal materials, so changeover is simple: drain the old oil fully, change the filter and refill. Aircol SR is not compatible with SBR or EPDM seals.

Which compressor-maker requirements does Aircol SR 68 meet?

Castrol lists Aircol SR as meeting the Atlas Copco 8,000-hour oil drain interval requirement and Kaeser requirements. Check your unit’s manual for its own oil specification.

Request a quotation

Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.

Request a Quote WhatsApp Us

Other Aircol SR compressor oils

Aircol SR 46

Related

Range page: Castrol Aircol compressor oils · all compressor oils · guide: compressor oil selection