Optileb HY 68
H1 hydraulic oilNSF H1 hydraulic oil for food-packaging and dairy-machinery hydraulics.
NSF H1-registered lubricants are the accepted choice wherever incidental food contact is possible — we supply the Optileb range.
Castrol Optileb GR 823-2 (NSF H1 grease), Optileb GT 100/220/460 (NSF H1 gear oils) and Optileb HY 68 (NSF H1 hydraulic oil) — NSF H1 registered for food, beverage, pharma and biotech equipment with possible incidental food contact. Batch COA, TDS, MSDS and NSF registration references supplied on request. Recommended for any equipment where lubricant could reach food zones.
NSF H1 hydraulic oil for food-packaging and dairy-machinery hydraulics.
Food-grade gear oil for mixers and conveyors where incidental food contact is possible.
NSF H1 grease for bearings on food-processing machinery.
NSF H1 gear oil, ISO VG 460, for heavily loaded gearboxes on food machinery.
Every Optileb grade below is NSF H1 registered, per the Castrol India catalogue. The gear oils and hydraulic oil are PAO synthetics; the grease is an aluminium-complex white-oil grease.
| Grade | Type | Viscosity | Viscosity index | Pour point / range | Use it for |
|---|---|---|---|---|---|
| Optileb HY 68 | PAO hydraulic oil (HLP) | ISO VG 68 | 143 | −45 °C | Hydraulics on filling, packing, dairy and bottling lines; exceeds DIN 51524 Part 2 |
| Optileb GT 100 | PAO EP/AW gear oil | ISO VG 100 | 148 | −42 °C | Lighter gearboxes, variable-speed chain drives, pumps and circulating systems |
| Optileb GT 220 | PAO EP/AW gear oil | ISO VG 220 | 157 | −36 °C | Spur, bevel and worm gears on mixers, agitators and conveyors |
| Optileb GT 460 | PAO EP/AW gear oil | ISO VG 460 | 151 | −27 °C | Heavily loaded and slow gearboxes |
| Optileb GR 823-2 | Aluminium-complex grease, white oil | NLGI 2, base oil 190 mm²/s | — | −30 to +120 °C | Slide and roller bearings that need high cleanliness; released by LGA Bavaria |
Typical values from the Castrol India industrial product catalogue; not a specification. Ask us for the current data sheet.
H1, H2 or H3? NSF H1 lubricants may be used where incidental food contact is possible; H2 lubricants are for equipment with no possibility of food contact; H3 covers soluble oils used to clean and protect hooks, trolleys and similar equipment. In a food or pharma plant, use H1 at every point above or near the product zone and keep the H2 points clearly labelled so the two are never swapped.
Switching a line to H1: list every lubrication point, drain and flush each system before the first H1 fill (mixing with a non-H1 oil can take the system out of H1 status), relabel the points and the grease guns, and file the NSF registration for each grade. We supply the NSF registration references on request. Background: NSF H1 lubricants explained and FSSAI alignment.
As the authorised Castrol industrial distributor for Andhra Pradesh, every drum and pail we supply comes through Castrol India’s authorised channel with batch traceability. Common food-grade grades are held in stock at Bhimavaram and IDA Mallapur; specialty grades are indented, with the dispatch date confirmed on the quotation. On-site support is available for application trials, oil sampling and training.
NSF H1 is a registration by NSF International for lubricants formulated for use where incidental food contact is possible. H1 lubricants are restricted to 10 parts per million of the final food product.
Best practice is H1 wherever a leak, spatter or airborne mist could reach product. Many plants adopt H1 plant-wide to reduce the risk of the wrong oil being used on direct-contact machinery.
NSF H1 registration means the lubricant is made only from ingredients permitted for incidental food contact under US FDA 21 CFR 178.3570, which sets a 10 ppm limit. It covers accidental contact that can happen despite good practice, not routine use: any visible contamination must still be handled under your HACCP plan. We supply the NSF registration references for each Optileb grade we deliver on request, for your audit file.
Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.
Request a Quote WhatsApp UsPreparing for an audit? Read the FSSAI food-grade lubricant alignment guide and our NSF H1 explainer.