Neat Cutting & Grinding Oils — Castrol Ilocut, Honilo, Variocut

Neat oils give high lubricity and good surface finish for heavy-duty and precision operations where water-mix coolants fall short.

Quick Answer

Castrol Ilocut and Honilo neat (non-water-mixed) cutting and grinding oils for high-precision and high-load machining. Ilocut series covers general machining, turning, deep-hole/gun drilling, broaching and threading. Honilo grades for honing and micro-finishing; Variocut G grades for high-speed, creep-feed and gear grinding. Ester, sulphur, phosphorus and chlorine additive options, selected by metal and cut severity.

Product Range

Ilocut 482

Neat cutting oil, ferrous and non-ferrous

Neat cutting oil for automatic lathe work, thread grinding, form grinding and milling of ferrous and non-ferrous metals.

Ilocut 154

Medium-duty cutting oil

General-purpose neat oil for repetition and general machining of both ferrous and non-ferrous metals.

Honilo 980

Honing oil

Honing and micro-finishing oil for standard applications on steel and non-ferrous metals.

Variocut B 30

Broaching oil

High-performance broaching and cutting oil for machining of gears in steel and stainless steel.

Variocut G 600 HC

Grinding oil

High-flash-point grinding oil for high-speed and creep-feed grinding.

Ilocut 155

General-purpose cutting oil

General-purpose neat oil for machining ferrous and non-ferrous metals; low copper staining (copper class 1a/1b).

Ilocut 330

Chlorine-free universal

Chlorine-free universal neat cutting oil; active-sulphur chemistry, so keep it away from copper and brass.

Ilocut 103

High-tensile steels

Neat cutting oil for machining high-tensile steels.

Ilocut 1945

Multi-spindle automats

Neat cutting oil for multi-spindle automatic lathes.

Ilocut 1253

Deep-hole and gun drilling

Low-viscosity (ISO VG 10) oil that reaches the cut and flushes swarf under pressure.

Ilocut 334

Deep-hole and gun drilling

Low-viscosity (ISO VG 14) deep-hole drilling oil.

Ilocut 534

Deep-hole drilling, high removal

Deep-hole drilling oil with added EP for high metal-removal rates.

Ilocut 11

Broaching and gear cutting

ISO VG 17 broaching and gear-cutting oil for steel, stainless steel and nickel alloys; chlorinated EP, copper class 1b.

Honilo 981

Honing, highest lubrication

Honing and superfinishing oil for the best possible lubrication.

Honilo 500

Lapping

Lapping oil for silicon-carbide abrasives.

Carecut ES 3

Ester-based honing

Ester-based neat oil for honing and superfinishing.

Variocut G 399

High-speed grinding

Thin neat grinding oil for high-speed grinding of steel.

Variocut G 408 HC

Carbide grinding

Grinding oil for carbide tools prone to cracking.

Variocut G 500

Flute grinding

Neat grinding oil for flute grinding.

Variocut G 650 HC

Creep-feed grinding

High-flash-point grinding oil for creep-feed grinding.

Which grade for which operation?

The Castrol India catalogue maps neat oils to the operation, not the machine: Ilocut 154 / 155 for general-purpose machining (with Ilocut 330 as the chlorine-free universal and Ilocut 103 for high-tensile steels), Ilocut 1253 / 334 / 534 at low viscosity for deep-hole and gun drilling, Ilocut 11 and Variocut B 30 for broaching and gear cutting, Honilo 980 / 981 for honing and superfinishing, and the Variocut G series for neat grinding — G 399 thin oil for high-speed grinding of steel, G 408 HC for carbide, G 600 HC and G 650 HC high-flash grades for creep-feed. One data-sheet column prevents most mistakes: the copper-corrosion stripe class — 1a/1b grades show low copper staining, 4b/4c grades carry active-sulphur EP chemistry that stains copper and brass.

Grades by operation

OperationCatalogue gradesSafe with copper and brass?
General machiningIlocut 154, 155, 330, 103, 1945154, 155: yes (class 1a/1b) · 330, 103: no (class 4b/4c)
Deep-hole and gun drillingIlocut 1253 (VG 10), 334 (VG 14), 5341253, 534: no (class 4b/4c)
Broaching and gear cuttingIlocut 11, Variocut B 30Ilocut 11: yes (class 1b) · Variocut B 30: no (class 4c)
Honing and superfinishingHonilo 980, 981, Carecut ES 3; Honilo 500 for lappingHonilo 980: yes (class 1a/1b)
Neat grindingVariocut G 399, G 408 HC, G 500, G 600 HC, G 650 HCG 399: no (class 4b/4c)
Thread and form grinding, automatic lathesIlocut 482yes (class 1a/1b)

Copper class from the Castrol data sheets: 1a/1b grades show low copper staining; 4b/4c grades carry active sulphur and stain copper and brass. Where a grade has no class shown here, check its data sheet. Most neat oils come in 210 L barrels; some imported grades in 208 L or 200 L.

Read the full cutting fluid selection guide →

Typical Applications

Gear cutting, shaping and shaving
Deep-hole drilling and gun drilling
Cylindrical and surface grinding
Honing and superfinishing
Broaching of high-strength alloys

Why buy from Vasundhara Specialities

As the authorised Castrol industrial distributor for Andhra Pradesh, every drum and pail we supply comes through Castrol India’s authorised channel with batch traceability. Common neat cutting and grinding oil grades are held in stock at Bhimavaram and IDA Mallapur; specialty grades are indented, with the dispatch date confirmed on the quotation. On-site support is available for application trials, oil sampling (analysis through our group's partner laboratory) and operator training. Paired with our CoolantCare fluid management programme, you get not just a supplier but a lubrication partner committed to lowering your total cost of lubrication.

Frequently Asked Questions

When should I choose a neat oil over a water-soluble coolant?

Neat oils are the right choice when you need maximum lubricity for heavy-duty operations (broaching, gear cutting, deep-hole drilling) or a superior surface finish (grinding, honing). Water-mix coolants are better for fast-paced high-volume machining where cooling matters more than lubrication.

What is the typical life of a neat cutting oil sump?

Neat oil life depends on filtration, contamination and top-up; oil analysis tells you when to change. Oil analysis through our group's partner laboratory can track oxidation and contamination.

Which neat cutting oils are safe with copper and brass?

Use a copper-class 1a/1b grade: Ilocut 154, Ilocut 155, Ilocut 482, Ilocut 11 or Honilo 980. Grades in class 4b/4c (Ilocut 103, 330, 534, 1253, Variocut B 30, Variocut G 399) carry active sulphur and will stain yellow metals.

Which oil should I use for deep-hole or gun drilling?

Castrol lists low-viscosity Ilocut grades for this duty: Ilocut 1253 (ISO VG 10) and Ilocut 334 (ISO VG 14), with Ilocut 534 adding EP for high metal-removal rates. The low viscosity lets the oil reach the cut and flush swarf under pressure.

Which Castrol oil is used for honing?

Honilo 980 for standard honing and superfinishing, Honilo 981 where you need the best possible lubrication, and Carecut ES 3 if you want an ester-based oil. Honilo 500 is for lapping with silicon-carbide abrasives.

What pack sizes do neat cutting oils come in?

Most neat cutting and grinding oils come in 210 L barrels; some imported grades come in 208 L or 200 L. We confirm the pack and the dispatch date on the quotation.

Request a quotation

Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.

Request a Quote WhatsApp Us