Magna SW 68
Light slidewayStandard slideway oil for horizontal ways on light and medium machine tools.
Dedicated slideway oils eliminate the stick-slip that general hydraulic oils cause on machine-tool ways.
Castrol Magna SW slideway lubricants for machine-tool slides, ways and bedways — Magna SW 68 and 220 viscosity grades. Most slideway oils carry a tackiness additive to resist sliding wash-off, plus extreme-pressure protection for high-load contact. Selection by machine size, slide loading and ambient temperature. For selection detail — viscosity, Cincinnati specifications and coolant separability — see our slideway and spindle oil selection guide.
Slideway oil is a tackified machine-tool lubricant formulated for the sliding ways that carry a machine’s table and saddle. Stick-slip — the jerky motion that ruins surface finish and positioning accuracy — happens when static friction on the way exceeds dynamic friction: the axis “sticks”, elastic wind-up builds in the drive, then it “slips” forward. Slideway oils solve this with friction modifiers that flatten the static-to-dynamic friction curve, plus tackifiers that keep the film on a vertical or inverted way under load.
Slideway oils are designated CGLP (DIN 51502; requirements in DIN 51517-3). Two viscosity grades cover most machine tools: ISO VG 68 for horizontal ways and general CNC work, and VG 220 for heavily loaded or vertical ways. The third critical property is coolant separability — a good slideway oil must release cleanly from water-mix metalworking fluid so the coolant sump isn’t poisoned by tramp oil that emulsifies.
Castrol Magna SW 68 and 220 are the main grades in this category — stocked and supported across AP & Telangana.
Standard slideway oil for horizontal ways on light and medium machine tools.
Heavy-duty slideway oil for large vertical surfaces and heavily loaded ways.
Slideway oil for combined lubrication of slideways, hydraulic systems and gears; Castrol lists it at Cincinnati P47.
All four Magna SW grades are mineral oils with EP/AW additives. The difference is viscosity, whether they carry the adhesive (tackiness) additive that holds the film on vertical ways, and which Cincinnati Lamb specification they meet.
| Grade | ISO VG | Adhesive additive | Cincinnati Lamb | Use it for |
|---|---|---|---|---|
| Magna SW 32 | 32 | No | — | Light machine tools where one oil serves the slideways and the hydraulics |
| Magna SW 68 | 68 | Yes | P47 | Most horizontal slideways on light and medium machine tools; also hydraulics and gears |
| Magna SW D 68 | 68 | Yes | P47 | Machines with one shared sump for slideways, hydraulics and gears; Castrol cites good results in SKC and Darmstadt University tests |
| Magna SW 220 | 220 | Yes | P50 | Vertical and inclined ways, heavy tables, and slides that drift or stick-slip on VG 68 |
Typical values from the Castrol India industrial product catalogue; not a specification. Ask us for the current data sheet.
Rule of thumb: VG 68 for horizontal ways, VG 220 for vertical or heavily loaded ways — but the machine builder’s manual wins. If the manual names Cincinnati P47 or P50, the table above shows the match. Slideway oil is not a substitute for spindle oil, and coolant splashing onto the ways is the main reason slideway oil fails early — see our slideway and spindle oil selection guide.
As the authorised Castrol industrial distributor for Andhra Pradesh, every drum and pail we supply comes through Castrol India’s authorised channel with batch traceability. Common slideway lubricants grades are held in stock at Bhimavaram and IDA Mallapur; specialty grades are indented, with the dispatch date confirmed on the quotation. On-site support is available for application trials, oil sampling and training.
Hydraulic oils lack the tackifier and oiliness additives that prevent stick-slip on steel-cast-iron slideway pairs. Using HLP on ways causes micro-chatter and premature wear, especially at slow feed rates.
Friction modifiers in a CGLP slideway oil bring static friction down to (or below) dynamic friction, so the axis starts moving smoothly instead of storing wind-up and jumping. Tackifiers keep that film in place under load and on vertical ways. If finish improves right after an oil change, stick-slip from a washed-out or wrong lubricant was the likely cause.
ISO VG 68 suits most horizontal slideways on light and medium machine tools. ISO VG 220 is used on vertical or inclined ways and heavy tables, where a thicker film is needed to stop the slide drifting or stick-slipping. Check the machine builder’s manual first; if it only names a specification, send it to us and we match the Magna SW grade.
It depends on your location and on whether the grade is a stocked line. AP orders dispatch from Bhimavaram and Telangana orders from IDA Mallapur, and we confirm the dispatch date on every quotation rather than quoting a standard window.
Slideway lubrication is the one machine-tool service where a generic hydraulic oil produces visibly worse results than a properly-specified slideway oil — visible as chatter marks on workpieces (especially on precision-grinder slides) and accelerated way wear that destroys machine-tool geometry. The reason is stick-slip: at low sliding velocity (typical of machine-tool feed motions on grinders, jig-bore mills, and VMCs), standard hydraulic oils break down their oil-film integrity, causing intermittent metal-to-metal contact at the slide-and-way interface. Slideway oils contain a tackiness additive package — typically polyisobutylene or specialty polymers — that maintains continuous oil-film integrity across all velocity profiles including very low sliding velocity.
The standard specifications for machine-tool slideway service are Cincinnati Lamb P47 (light-load slides) and P50 (heavy-load slides). Castrol lists Magna SW 68 at P47 — used for turning-centre Z-axis slides, precision-grinder cross-slides, small-VMC X-axis slides, and other lightly-loaded machine-tool slide applications. Castrol lists Magna SW 220 (ISO VG 220) at P50 — used for VTL slides, large-VMC X-axis slides, gear-cutter slides, planer slides, and other heavily-loaded applications. For machines where one fluid lubricates the slideways, the hydraulic system and the gears, Magna SW D 68 is the grade, also listed at P47.
The second technical consideration is coolant-coexistence behaviour. Way lubrication is a total-loss system, so almost all slideway oil ends up in the coolant sump. An oil that separates cleanly floats as tramp oil and can be skimmed off; one that emulsifies degrades the coolant and shortens sump life. Confirm separability for a given grade on its data sheet.
Vasundhara Specialities supplies the full Castrol Magna slideway range across Andhra Pradesh and Telangana, with selection advice against the machine builder’s lubrication chart.
Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.
Request a Quote WhatsApp UsChoosing a slideway grade? Our slideway and spindle oil selection guide works through stick-slip, tackiness, the Cincinnati specifications, coolant separability and how spindle duty differs, with the catalogue figures for every grade in one table.