Magna 2
Light spindle oilHighly refined spindle oil for high-speed spindle bearings.
Ultra-low-viscosity oils engineered for the razor-thin oil films of high-speed spindles.
Castrol Magna 2 and Hyspin spindle oil E 5 precision spindle oils for high-speed precision spindles in machine tools, grinders and gear-cutting. Very low viscosity (2–13 mm²/s at 40 °C across Magna 2, Hyspin Spindle Oil E 5 and EE 10) for minimum churning loss at high speed. Highly refined (Magna 2) and anti-wear (Hyspin Spindle Oil E 5 / EE 10) grades. Selection by spindle type, RPM range and bearing precision class.
Spindle oil is an ultra-low-viscosity, high-purity lubricant — typically ISO VG 2 to VG 22 — made for plain and rolling-element bearings running at very high rotational speeds. At high dmN values (bearing bore × rpm), a thicker oil generates churning heat faster than it can be removed; spindle oil keeps the film thick enough to separate surfaces while staying thin enough to run cool.
Viscosity selection follows spindle speed: VG 2–5 for ultra-high-speed grinding and textile spindles, VG 10 for typical machine-tool spindle bearings, VG 22 where speeds are moderate and loads higher. Oxidation stability and cleanliness matter disproportionately — a spindle bearing has near-zero tolerance for varnish or particles — which is why spindle oils are refined and filtered to tighter standards than general-purpose lubricants.
Castrol Magna 2 anchors the range for high-speed spindles, with Hyspin Spindle Oil E 5 and EE 10 covering moderate-speed duty — stocked and supported across AP & Telangana.
Highly refined spindle oil for high-speed spindle bearings.
Low-viscosity anti-wear spindle oil (5 mm²/s at 40 °C) for high-speed spindle lubrication.
Spindle oils are chosen by speed: the faster the spindle, the thinner the oil. These are the Castrol India spindle grades we supply.
| Grade | Base oil | Viscosity at 40 °C | Additives | Pour point | Use it for |
|---|---|---|---|---|---|
| Magna 2 | Highly refined mineral | 2 mm²/s | — | below −30 °C | Very high-speed spindle bearings, grinding spindles |
| Hyspin Spindle Oil E 5 | Mineral | 5 mm²/s | Anti-wear | −39 °C | High-speed spindle lubrication |
| Hyspin Spindle Oil EE 10 | Mineral | 13 mm²/s | Anti-wear | −12 °C | High-speed textile spindles, machine-tool spindle bearings, positive-displacement blowers, timing gears, centrifuge separators |
| Hyspin Spindle Coolant SF | Water-based, ready to use | — | — | −15 °C | Spindle cooling circuits on machine tools, with strong corrosion protection |
Typical values from the Castrol India industrial product catalogue; not a specification. Ask us for the current data sheet.
Thicker is not safer in a spindle: oil that is too heavy raises bearing temperature and power draw. Start from the spindle maker’s grade; if it only gives a speed factor (n·dm), our selection guide converts it to an ISO VG. For the slideways on the same machine, see Magna SW slideway oils.
As an authorised Castrol industrial distributor (Andhra Pradesh), every drum and pail we supply comes through Castrol India’s authorised channel with batch traceability. Common spindle-oil grades are held in stock at Bhimavaram and IDA Mallapur; specialty grades are indented, with the dispatch date confirmed on the quotation. On-site support is available for application trials, oil sampling and training.
Check with the mist-generator maker first: very low-viscosity oils can vaporise rather than form a film, so the mist system's recommended viscosity decides the grade.
ISO VG 2 to VG 22, chosen by spindle speed. Ultra-high-speed grinding and textile spindles run VG 2–5 (e.g. Castrol Magna 2), typical machine-tool spindles VG 10, and moderate-speed, higher-load spindles VG 22. When in doubt, follow the spindle OEM’s dmN-based recommendation.
No. Spindle oil is much thinner (VG 2–22 vs VG 32–68), more highly refined, and formulated for bearing lubrication at extreme speed — not for power transmission. Using hydraulic oil in a high-speed spindle overheats the bearing; using spindle oil in a hydraulic system starves pumps of film thickness.
Spindle oils are very thin (ISO VG 2–22) and built to lubricate high-speed bearings with minimal heat and drag. Slideway oils are much thicker (typically ISO VG 68–220) and carry tackiness and friction-modifying additives so tables move smoothly without stick-slip. One cannot replace the other: slideway oil in a spindle overheats the bearings, and spindle oil on slideways is squeezed out of the contact.
It depends on your location and on whether the grade is a stocked line — AP orders dispatch from our Bhimavaram warehouse and Telangana orders from our IDA Mallapur warehouse in Hyderabad. We confirm the dispatch schedule on the quotation rather than quoting a standard window. We quote a firm delivery date with every quotation rather than a blanket promise.
Spindle-oil selection is one of the most application-specific decisions in industrial lubrication, and getting it wrong manifests directly as bearing temperature drift, chatter on workpieces, or premature bearing fatigue. The primary variable is operating RPM combined with bearing pitch diameter (the "ndm" speed factor in bearing engineering). For precision-grinder spindles running 10,000-20,000+ RPM with small-bore precision angular-contact bearings, very low-viscosity oils such as Castrol Magna 2 minimise bearing churning loss and heat generation — heavier oil raises bearing temperature at these speeds. For medium-speed spindles (5,000-10,000 RPM typical of gear-cutter spindles and jig-bore mill spindles), ISO VG 5 oils balance film thickness against churning loss. For slow-speed precision spindles below 5,000 RPM — large-bore VTL main-spindle bearings, planer-mill spindles — ISO VG 22 oils provide the film-thickness margin necessary for the heavier loading these bearings see. The second variable is circulation method. Oil-bath (sump) spindles need oil with good demulsibility (water separates cleanly at the drain pot during oil-change), excellent oxidation stability (an R&O additive package for long bath life, with the change point taken from the spindle OEM schedule), and low foaming tendency. Oil-mist and air-oil systems need oils formulated specifically to atomise correctly through the mist generator — too-thick oils don't form proper droplets, too-thin oils carry over into the bearing housing as vapour rather than depositing as a film. Hyspin Spindle Coolant SF is a ready-to-use water-based spindle coolant for machine tools. The third variable is bearing type. Ball-bearing spindles tolerate a wider viscosity range than precision roller-bearing spindles. Hybrid ceramic-ball bearings used in the most demanding high-speed spindles need oils with very low viscosity and specialty additive packages. Vasundhara Specialities can review your spindle grades across AP and Telangana to spec the right Magna or Hyspin grade for each spindle application, and arrange oil-condition monitoring through our group's partner laboratory.
Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.
Request a Quote WhatsApp UsTextile plants also stock our knitting oils and multi-purpose oils.