Castrol Hysol SL 20 XBB — Semi-Synthetic Metalworking Fluid

Boron-, MEA- and formaldehyde-releaser-free semi-synthetic for grey cast iron and low-alloy steel. Supplied across Andhra Pradesh and Telangana.

Request a QuoteWhatsAppPacks: 20 L pails and 210 L barrels

What Hysol SL 20 XBB is

Castrol Hysol SL 20 XBB is a high-performance semi-synthetic metalworking fluid formulated without formaldehyde-releasing agents and boron.

It is especially designed for machining cast iron and low-alloy steel. Read the sump with a refractometer and multiply the Brix reading by the factor of 1.6.

Typical properties

PropertyMethodTypical value
Concentrate appearanceVisualAmber
Mineral oil in concentrateCalculated20 %
Emulsion appearanceVisualTranslucent
pH, 5 % emulsionDIN 513699.8
Refractometer factorASTM E70-971.6
Grinding—4–6 %
General machining—6–10 %
Drilling—6–8 %
Reaming—6–10 %
Broaching—6–10 %
Water range—5–45 ppm (Castrol India catalogue)

Typical values, not a specification; water range from the Castrol India catalogue. Confirm against the current Castrol data sheet, supplied on request.

Metals and handling

Where it is used

SL 20 XBB or SL 35 XBB?

Both use Castrol’s XBB technology for cast iron and steel. SL 20 XBB is boron-free with 20 % oil; SL 35 XBB carries 35 % oil. See the cutting fluid selection guide.

Packs and supply

20 L pails and 210 L barrels. Batch COA, TDS and MSDS are supplied with every order on request. On larger systems we can check concentration and pH on site during changeover.

Hysol SL 20 XBB compared with other Hysol grades

All values are typical figures from the Castrol India catalogue or the grade’s data sheet; the current data sheet is binding. Match the water hardness first, then the job.

GradeMineral oilIn useRefractometer factorWater hardnessBest for
Hysol 350528 %4–8 %1.320–200 ppmCast iron and low-alloy steel; large central systems
Hysol 651929 %4–8 %1.4100–400 ppmGrinding and machining aluminium and low-to-medium-alloy steel
Hysol EP 69044 %4–10 %1.050–400 ppmGeneral machining: milling, drilling, tapping, reaming
Hysol G 10010 %3–6 %1.850–250 ppmMachining cast iron; grinding low-to-medium-alloy steel
Hysol MB 5050 %5–10 %1.0100–1,000 ppmLow- to high-alloy steels and aerospace alloys
Hysol RD35 %4–8 %1.175–300 ppmGrinding steel; machining alloy steel and grey cast iron
Hysol SL 20 XBB (this page)20 %4–10 %1.65–45 ppmGrey cast iron and low-alloy steel; boron-free
Hysol SL 35 XBB35 %4–10 %1.1150–450 ppmCast iron and low-alloy steel
Hysol T 15 I24 %4–10 %1.550–800 ppmCast iron and low-to-medium-alloy steel
Hysol X45 %4–12 %1.045–300 ppmAlloy and high-alloy steel, aluminium alloys

Not sure between a soluble, a synthetic and a neat oil? Read how to choose a cutting fluid.

Frequently Asked Questions

What concentration should I run Hysol SL 20 XBB at?

Castrol India lists 4–6 % for grinding, 6–10 % for general machining, reaming and broaching, and 6–8 % for drilling. Check with a refractometer using a factor of 1.6.

Does Hysol SL 20 XBB contain boron?

No. Castrol India formulates it without boron and without formaldehyde-releasing agents.

Which metals is Hysol SL 20 XBB for?

Castrol India designs it especially for cast iron and low-alloy steel.

What water hardness does Hysol SL 20 XBB need?

Castrol lists 5–45 ppm for Hysol SL 20 XBB. Test your water before you mix: borewell water in Andhra Pradesh and Telangana is often hard. If your water falls outside this range, mix with treated water or choose a grade whose range fits, using the comparison table on this page.

Can I get Hysol SL 20 XBB quickly in Hyderabad or Andhra Pradesh?

Common grades are held at our IDA Mallapur warehouse in Hyderabad and at Bhimavaram; other grades are indented from Castrol India, and the dispatch date is confirmed on the quotation. Batch COA, TDS and MSDS are supplied on request.

Request a quotation

Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.

Request a Quote WhatsApp Us

Other Hysol soluble coolants

Hysol 3505 · Hysol 6519 · Hysol EP 690 · Hysol G 100 · Hysol MB 50 · Hysol RD · Hysol SL 35 XBB · Hysol T 15 I · Hysol X

Related

Range page: Castrol Hysol cutting fluids · all metalworking coolants · guide: synthetic vs mineral coolants · cutting fluid selection guide