Semi-synthetic for large central systems and single-sump machines, especially for cast iron and low-alloyed steel. Supplied across Andhra Pradesh and Telangana with on-site concentration checks.
Castrol Hysol 3505 is a translucent water-soluble coolant for large central systems and single-sump machines, especially for cast iron and low-alloyed steel.
Typical use concentration is 4–8 % in water of 20–200 ppm hardness. Read the sump with a refractometer and multiply the Brix reading by the factor of 1.3 to get the true concentration.
| Property | Typical value |
|---|---|
| Mineral oil in concentrate | 28 % |
| Ester / EP additive | Yes |
| Boron | Yes |
| pH, 5 % emulsion | 9.4 |
| Emulsion appearance | translucent |
| Application concentration | 4–8 % |
| Refractometer factor | 1.3 |
| Water hardness range | 20–200 ppm |
Source: Castrol India industrial product catalogue (water-soluble coolants table). Typical values, not a specification.
Start from the metal and the operation. Cast-iron-heavy shops lean to the grades Castrol designs for cast iron; aluminium and mixed-metal shops need a grade with aluminium suitability; heavy tapping and broaching want higher concentration and EP. Our cutting fluid selection guide and sump life guide cover the trade-offs.
20 L pails and 210 L barrels. Batch COA, TDS and MSDS are supplied with every order on request. On larger systems we can check concentration and pH on site during changeover.
All values are typical figures from the Castrol India catalogue or the grade’s data sheet; the current data sheet is binding. Match the water hardness first, then the job.
| Grade | Mineral oil | In use | Refractometer factor | Water hardness | Best for |
|---|---|---|---|---|---|
| Hysol 3505 (this page) | 28 % | 4–8 % | 1.3 | 20–200 ppm | Cast iron and low-alloy steel; large central systems |
| Hysol 6519 | 29 % | 4–8 % | 1.4 | 100–400 ppm | Grinding and machining aluminium and low-to-medium-alloy steel |
| Hysol EP 690 | 44 % | 4–10 % | 1.0 | 50–400 ppm | General machining: milling, drilling, tapping, reaming |
| Hysol G 100 | 10 % | 3–6 % | 1.8 | 50–250 ppm | Machining cast iron; grinding low-to-medium-alloy steel |
| Hysol MB 50 | 50 % | 5–10 % | 1.0 | 100–1,000 ppm | Low- to high-alloy steels and aerospace alloys |
| Hysol RD | 35 % | 4–8 % | 1.1 | 75–300 ppm | Grinding steel; machining alloy steel and grey cast iron |
| Hysol SL 20 XBB | 20 % | 4–10 % | 1.6 | 5–45 ppm | Grey cast iron and low-alloy steel; boron-free |
| Hysol SL 35 XBB | 35 % | 4–10 % | 1.1 | 150–450 ppm | Cast iron and low-alloy steel |
| Hysol T 15 I | 24 % | 4–10 % | 1.5 | 50–800 ppm | Cast iron and low-to-medium-alloy steel |
| Hysol X | 45 % | 4–12 % | 1.0 | 45–300 ppm | Alloy and high-alloy steel, aluminium alloys |
Not sure between a soluble, a synthetic and a neat oil? Read how to choose a cutting fluid.
Castrol lists 4–8 % for Hysol 3505. Run the lower end for grinding and light machining and the higher end for heavy cutting, tapping or broaching, and check with a refractometer using a factor of 1.3.
The Castrol catalogue lists it for grey cast iron, low-alloyed steels, high-alloyed steels, aluminium alloys. For anything else, ask us before use.
Yes, per the Castrol catalogue.
Castrol lists 20–200 ppm for Hysol 3505. Test your water before you mix: borewell water in Andhra Pradesh and Telangana is often hard. If your water falls outside this range, mix with treated water or choose a grade whose range fits, using the comparison table on this page.
Common grades are held at our IDA Mallapur warehouse in Hyderabad and at Bhimavaram; other grades are indented from Castrol India, and the dispatch date is confirmed on the quotation. Batch COA, TDS and MSDS are supplied on request.
Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.
Request a Quote WhatsApp UsHysol RD · Hysol X · Hysol T 15 I · Hysol SL 35 XBB · Hysol MB 50 · Hysol G 100 · Hysol EP 690 · Hysol 6519 · Hysol SL 20 XBB
Range page: Castrol Hysol cutting fluids · all metalworking coolants · guide: synthetic vs mineral coolants · for the same machines: slideway oils, spindle oils · cutting fluid selection guide