Castrol Hysol MB 50 — Water-Soluble Metalworking Fluid

Soluble coolant for low-to-medium-alloyed steel, high-alloyed steel and other alloys used in the aerospace industry (Castrol’s catalogue wording). Supplied across Andhra Pradesh and Telangana with on-site concentration checks.

Request a QuoteWhatsAppPacks: 20 L pails and 208 L barrels

What Hysol MB 50 is

Castrol Hysol MB 50 is a soluble coolant for low-to-medium-alloyed steel, high-alloyed steel and other alloys used in the aerospace industry (Castrol’s catalogue wording). Castrol formulates it without formaldehyde-releasing agents and rates it for large central systems as well as single-sump machines.

Typical use concentration is 5–10 % in water of 100–1,000 ppm hardness (as CaCO₃) per the data sheet; the Castrol India catalogue gives 75–750 ppm. Read the sump with a refractometer and multiply the Brix reading by the factor of 1.0 to get the true concentration.

Typical properties

PropertyMethodTypical value
Mineral oil in concentrateCalculated50 %
Concentrate appearanceVisualAmber
Emulsion appearanceVisualMilky
pH, 5 % emulsionDIN 513699.7
Refractometer factor—1.0
Grinding—5–7 %
General machining—5–8 %
Drilling—6–8 %
Reaming and tapping—7–10 %
Broaching—8–10 %
Water range—100–1,000 ppm CaCO₃

Source: Castrol Hysol MB 50 product data sheet (March 2021). Typical values, not a specification.

Metals it suits

Where it is used

Choosing between Hysol grades

Start from the metal and the operation. Cast-iron-heavy shops lean to the low-oil semi-synthetics; aluminium and mixed-metal shops need a grade with aluminium suitability; heavy tapping and broaching want higher concentration and EP. Our cutting fluid selection guide and sump life guide cover the trade-offs.

Packs and supply

20 L pails and 208 L barrels. Batch COA, TDS and MSDS are supplied with every order on request. On larger systems we can check concentration and pH on site during changeover.

Hysol MB 50 compared with other Hysol grades

All values are typical figures from the Castrol India catalogue or the grade’s data sheet; the current data sheet is binding. Match the water hardness first, then the job.

GradeMineral oilIn useRefractometer factorWater hardnessBest for
Hysol 350528 %4–8 %1.320–200 ppmCast iron and low-alloy steel; large central systems
Hysol 651929 %4–8 %1.4100–400 ppmGrinding and machining aluminium and low-to-medium-alloy steel
Hysol EP 69044 %4–10 %1.050–400 ppmGeneral machining: milling, drilling, tapping, reaming
Hysol G 10010 %3–6 %1.850–250 ppmMachining cast iron; grinding low-to-medium-alloy steel
Hysol MB 50 (this page)50 %5–10 %1.0100–1,000 ppmLow- to high-alloy steels and aerospace alloys
Hysol RD35 %4–8 %1.175–300 ppmGrinding steel; machining alloy steel and grey cast iron
Hysol SL 20 XBB20 %4–10 %1.65–45 ppmGrey cast iron and low-alloy steel; boron-free
Hysol SL 35 XBB35 %4–10 %1.1150–450 ppmCast iron and low-alloy steel
Hysol T 15 I24 %4–10 %1.550–800 ppmCast iron and low-to-medium-alloy steel
Hysol X45 %4–12 %1.045–300 ppmAlloy and high-alloy steel, aluminium alloys

Not sure between a soluble, a synthetic and a neat oil? Read how to choose a cutting fluid.

Frequently Asked Questions

What concentration should I run Hysol MB 50 at?

Castrol lists 5–10 % for Hysol MB 50. Run the lower end for grinding and light machining and the higher end for heavy cutting, tapping or broaching, and check with a refractometer using a factor of 1.0.

Which metals can I machine with Hysol MB 50?

The Castrol catalogue lists it for grey cast iron, low-alloyed steels, high-alloyed steels, aluminium alloys, non-ferrous metals. For anything else, ask us before use.

Does Hysol MB 50 contain boron?

Yes, per the Castrol catalogue.

What water hardness does Hysol MB 50 need?

Castrol lists 100–1,000 ppm for Hysol MB 50. Test your water before you mix: borewell water in Andhra Pradesh and Telangana is often hard. If your water falls outside this range, mix with treated water or choose a grade whose range fits, using the comparison table on this page.

Can I get Hysol MB 50 quickly in Hyderabad or Andhra Pradesh?

Common grades are held at our IDA Mallapur warehouse in Hyderabad and at Bhimavaram; other grades are indented from Castrol India, and the dispatch date is confirmed on the quotation. Batch COA, TDS and MSDS are supplied on request.

Request a quotation

Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.

Request a Quote WhatsApp Us

Other Hysol soluble coolants

Hysol RD · Hysol X · Hysol T 15 I · Hysol SL 35 XBB · Hysol G 100 · Hysol EP 690 · Hysol 3505 · Hysol 6519 · Hysol SL 20 XBB

Related

Range page: Castrol Hysol cutting fluids · all metalworking coolants · guide: synthetic vs mineral coolants · for the same machines: slideway oils, spindle oils · cutting fluid selection guide