Castrol Hysol EP 690 — Water-Soluble Metalworking Fluid

Water-soluble coolant for large central systems and single sumps, recommended for most general machining — milling, drilling, tapping and reaming. Supplied across Andhra Pradesh and Telangana with on-site concentration checks.

Request a QuoteWhatsAppPacks: Barrels (210 L)

What Hysol EP 690 is

Castrol Hysol EP 690 is a water-soluble coolant (44 % mineral oil in the concentrate) for large central systems and single sumps, recommended for most general machining — milling, drilling, tapping and reaming.

Typical use concentration is 4–10 % in water of 50–400 ppm hardness. Read the sump with a refractometer and multiply the Brix reading by the factor of 1.0 to get the true concentration.

Typical properties

PropertyTypical value
Mineral oil in concentrate44 %
Ester / EP additiveNo
BoronNo
pH, 5 % emulsion9.0
Emulsion appearancetranslucent
Application concentration4–10 %
Refractometer factor1.0
Water hardness range50–400 ppm

Source: Castrol India industrial product catalogue (water-soluble coolants table). Typical values, not a specification.

Metals it suits

Where it is used

Choosing between Hysol grades

Start from the metal and the operation. Cast-iron-heavy shops lean to the low-oil semi-synthetics; aluminium and mixed-metal shops need a grade with aluminium suitability; heavy tapping and broaching want higher concentration and EP. Our cutting fluid selection guide and sump life guide cover the trade-offs.

Packs and supply

Barrels (210 L). Batch COA, TDS and MSDS are supplied with every order on request. On larger systems we can check concentration and pH on site during changeover.

Hysol EP 690 compared with other Hysol grades

All values are typical figures from the Castrol India catalogue or the grade’s data sheet; the current data sheet is binding. Match the water hardness first, then the job.

GradeMineral oilIn useRefractometer factorWater hardnessBest for
Hysol 350528 %4–8 %1.320–200 ppmCast iron and low-alloy steel; large central systems
Hysol 651929 %4–8 %1.4100–400 ppmGrinding and machining aluminium and low-to-medium-alloy steel
Hysol EP 690 (this page)44 %4–10 %1.050–400 ppmGeneral machining: milling, drilling, tapping, reaming
Hysol G 10010 %3–6 %1.850–250 ppmMachining cast iron; grinding low-to-medium-alloy steel
Hysol MB 5050 %5–10 %1.0100–1,000 ppmLow- to high-alloy steels and aerospace alloys
Hysol RD35 %4–8 %1.175–300 ppmGrinding steel; machining alloy steel and grey cast iron
Hysol SL 20 XBB20 %4–10 %1.65–45 ppmGrey cast iron and low-alloy steel; boron-free
Hysol SL 35 XBB35 %4–10 %1.1150–450 ppmCast iron and low-alloy steel
Hysol T 15 I24 %4–10 %1.550–800 ppmCast iron and low-to-medium-alloy steel
Hysol X45 %4–12 %1.045–300 ppmAlloy and high-alloy steel, aluminium alloys

Not sure between a soluble, a synthetic and a neat oil? Read how to choose a cutting fluid.

Frequently Asked Questions

What concentration should I run Hysol EP 690 at?

Castrol lists 4–10 % for Hysol EP 690. Run the lower end for light machining and the higher end for heavy cutting, tapping or broaching, and check with a refractometer using a factor of 1.0.

Which metals can I machine with Hysol EP 690?

The Castrol catalogue lists it for grey cast iron, low-alloyed steels, high-alloyed steels, aluminium alloys, non-ferrous metals. For anything else, ask us before use.

Does Hysol EP 690 contain boron?

No — the Castrol catalogue lists it as boron-free.

What water hardness does Hysol EP 690 need?

Castrol lists 50–400 ppm for Hysol EP 690. Test your water before you mix: borewell water in Andhra Pradesh and Telangana is often hard. If your water falls outside this range, mix with treated water or choose a grade whose range fits, using the comparison table on this page.

Can I get Hysol EP 690 quickly in Hyderabad or Andhra Pradesh?

Common grades are held at our IDA Mallapur warehouse in Hyderabad and at Bhimavaram; other grades are indented from Castrol India, and the dispatch date is confirmed on the quotation. Batch COA, TDS and MSDS are supplied on request.

Request a quotation

Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.

Request a Quote WhatsApp Us

Other Hysol soluble coolants

Hysol RD · Hysol X · Hysol T 15 I · Hysol SL 35 XBB · Hysol MB 50 · Hysol G 100 · Hysol 3505 · Hysol 6519 · Hysol SL 20 XBB

Related

Range page: Castrol Hysol cutting fluids · all metalworking coolants · guide: synthetic vs mineral coolants · for the same machines: slideway oils, spindle oils · cutting fluid selection guide