Cutting and grinding fluid for aerospace aluminium alloys and composite fibre materials; Boeing approved to BAC 5578. Supplied across Andhra Pradesh and Telangana.
Castrol Syntilo 9828 is a cutting and grinding fluid for aerospace aluminium alloys and composite fibre materials; Boeing approved to BAC 5578. As a synthetic it forms a clear solution rather than a milky emulsion, which keeps the work zone visible and flushes fine grinding swarf well.
Typical use concentration is 4–10 %, in water of 15–200 ppm hardness; the catalogue prints a refractometer factor of 1.2–4.1 — confirm the factor on the current data sheet before setting concentration.
| Property | Typical value |
|---|---|
| Mineral oil in concentrate | 0 % |
| Boron | No |
| pH, 5 % solution | 8.0–8.7 |
| Solution appearance | transparent, slightly hazy |
| Application concentration | 4–10 % |
| Refractometer factor | 1.2–4.1 (as printed; confirm on data sheet) |
| Water hardness range | 15–200 ppm |
Source: Castrol India industrial product catalogue (synthetic water-soluble coolants table). Typical values, not a specification.
Synthetics suit grinding and light-to-medium machining where cleanliness and visibility matter; soluble oils carry more lubricity for heavy cutting. See synthetic vs mineral coolants and the Hysol grades on the coolants page.
Barrels (210 L). Batch COA, TDS and MSDS are supplied with every order on request.
All values are typical figures from the Castrol India catalogue or the grade’s data sheet; the current data sheet is binding. Match the water hardness first, then the job.
| Grade | In use | Refractometer factor | Water hardness | Best for |
|---|---|---|---|---|
| Syntilo 2000 | 2–20 % | 1.7 | 30–300 ppm | Grinding, honing and heavy machining of ferrous metals |
| Syntilo 9828 (this page) | 4–10 % | see data sheet | 15–200 ppm | Aerospace aluminium alloys and composites |
| Syntilo 9904 | 4–10 % | 1.9 | 0–300 ppm | All grinding types, honing, gear hobbing |
| Syntilo 9930 | 4–8 % | 2.3 | 0–400 ppm | Grinding; light machining of cast iron and low-carbon steel |
| Syntilo 9954 | 4–15 % | 1.4 | 15–255 ppm | Grinding and heavy machining of ferrous metals |
| Syntilo CR 4 | 5–6 % | 1.4 | 45–300 ppm | Carbide grinding without cobalt release |
| Syntilo NF | 1.5–3 % | 2.4 | stable at 500 ppm | Nitrite-free; cast iron grinding and machining |
Not sure between a soluble, a synthetic and a neat oil? Read how to choose a cutting fluid.
Castrol lists 4–10 %. Check the sump with a refractometer, using the factor on the current data sheet (the catalogue prints 1.2–4.1).
Yes, the Castrol catalogue lists it as boron-free.
Cutting and grinding fluid for aerospace aluminium alloys and composite fibre materials; Boeing approved to BAC 5578.
Castrol lists 15–200 ppm for Syntilo 9828. Test your water before you mix: borewell water in Andhra Pradesh and Telangana is often hard. If your water falls outside this range, mix with treated water or choose a grade whose range fits, using the comparison table on this page.
Common grades are held at our IDA Mallapur warehouse in Hyderabad and at Bhimavaram; other grades are indented from Castrol India, and the dispatch date is confirmed on the quotation. Batch COA, TDS and MSDS are supplied on request.
Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.
Request a Quote WhatsApp UsSyntilo NF · Syntilo CR 4 · Syntilo 2000 · Syntilo 9904 · Syntilo 9930 · Syntilo 9954
Range page: Castrol metalworking fluids · all metalworking coolants · guide: coolant sump life · for the same machines: slideway oils, spindle oils · cutting fluid selection guide