Castrol Syntilo NF — Nitrite-Free Synthetic Coolant for Cast Iron

Nitrite-free, boron-free synthetic for grinding and machining cast iron and ferrous metals. Supplied in 210 L drums across Andhra Pradesh and Telangana.

Request a QuoteWhatsAppPacks: 210 L drums

What Syntilo NF is

Castrol Syntilo NF is a synthetic, nitrite-free and boron-free coolant for ferrous metals only, formulated to overcome the difficulty of cutting and grinding cast iron with soluble media. A small amount of EP additive helps achieve a high surface finish.

Castrol positions it for production grinding where wheel grains must cut continuously without burn marks, and for light-duty machining. Being oil-free, it flushes well and leaves no sticky grinding swarf on the machine.

Typical properties

PropertyMethodTypical value
Appearance—Bright, clear yellow liquid
Relative density at 29.5 °C—1.03
pH, 3 % solution—9.6
5 % in tap water—Translucent, stable
5 % in 500 ppm hard water—Translucent, stable
Cast iron corrosionIP 125Pass
Refractometer factor—2.4
Grinding, cast iron—1.5–2 %
Turning, drilling, milling, cast iron—2.0–2.5 %
Low-carbon and alloy steel—2 % grinding, 3 % machining

Source: Castrol Syntilo NF product data sheet (July 2024). Typical values, not a specification.

Points to note

Where it is used

Syntilo NF or a soluble oil?

For cast iron grinding where swarf sticks and rust spotting is a problem, Syntilo NF is the simpler choice. For heavier cutting on steel, compare the Hysol soluble grades.

Packs and supply

210 L drums. Batch COA, TDS and MSDS are supplied with every order on request.

Syntilo NF compared with other Syntilo grades

All values are typical figures from the Castrol India catalogue or the grade’s data sheet; the current data sheet is binding. Match the water hardness first, then the job.

GradeIn useRefractometer factorWater hardnessBest for
Syntilo 20002–20 %1.730–300 ppmGrinding, honing and heavy machining of ferrous metals
Syntilo 98284–10 %see data sheet15–200 ppmAerospace aluminium alloys and composites
Syntilo 99044–10 %1.90–300 ppmAll grinding types, honing, gear hobbing
Syntilo 99304–8 %2.30–400 ppmGrinding; light machining of cast iron and low-carbon steel
Syntilo 99544–15 %1.415–255 ppmGrinding and heavy machining of ferrous metals
Syntilo CR 45–6 %1.445–300 ppmCarbide grinding without cobalt release
Syntilo NF (this page)1.5–3 %2.4stable at 500 ppmNitrite-free; cast iron grinding and machining

Not sure between a soluble, a synthetic and a neat oil? Read how to choose a cutting fluid.

Frequently Asked Questions

Is Syntilo NF nitrite-free?

Yes. Castrol describes Syntilo NF as a nitrite-free and boron-free synthetic coolant for ferrous metals.

What concentration should Syntilo NF run at?

Castrol lists 1.5–2 % for grinding cast iron and 2.0–2.5 % for turning, drilling and milling cast iron; 2 % grinding and 3 % machining on low-carbon and alloy steel.

Can I use Syntilo NF on aluminium?

No. Castrol states it is intended for ferrous metals only.

Can Syntilo NF be mixed with hard water?

Castrol’s data sheet shows a 5 % mix of Syntilo NF staying translucent and stable in 500 ppm hard water. Test your water first; if it is harder than that, mix with treated water.

Can I get Syntilo NF quickly in Hyderabad or Andhra Pradesh?

Common grades are held at our IDA Mallapur warehouse in Hyderabad and at Bhimavaram; other grades are indented from Castrol India, and the dispatch date is confirmed on the quotation. Batch COA, TDS and MSDS are supplied on request.

Request a quotation

Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.

Request a Quote WhatsApp Us

Other Syntilo synthetic coolants

Syntilo CR 4 · Syntilo 2000 · Syntilo 9828 · Syntilo 9904 · Syntilo 9930 · Syntilo 9954

Related

Range page: Castrol metalworking fluids · all metalworking coolants · for the same machines: slideway oils, spindle oils · cutting fluid selection guide