Synthetic coolant for grinding and heavy machining of ferrous metals. Supplied across Andhra Pradesh and Telangana.
Castrol Syntilo 9954 is a synthetic coolant for grinding and heavy machining of ferrous metals. As a synthetic it forms a clear solution rather than a milky emulsion, which keeps the work zone visible and flushes fine grinding swarf well.
Typical use concentration is 4–15 %, in water of 15–255 ppm hardness; the refractometer factor is 1.4.
| Property | Typical value |
|---|---|
| Mineral oil in concentrate | 0 % |
| Boron | Yes |
| pH, 5 % solution | 8.6 |
| Solution appearance | transparent |
| Application concentration | 4–15 % |
| Refractometer factor | 1.4 |
| Water hardness range | 15–255 ppm |
Source: Castrol India industrial product catalogue (synthetic water-soluble coolants table). Typical values, not a specification.
Castrol lists Syntilo 9954 for grinding and heavy machining of ferrous metals; for other heavy cutting, compare Hysol soluble oils. See synthetic vs mineral coolants and the Hysol grades on the coolants page.
Pack sizes are confirmed at enquiry. Batch COA, TDS and MSDS are supplied with every order on request.
All values are typical figures from the Castrol India catalogue or the grade’s data sheet; the current data sheet is binding. Match the water hardness first, then the job.
| Grade | In use | Refractometer factor | Water hardness | Best for |
|---|---|---|---|---|
| Syntilo 2000 | 2–20 % | 1.7 | 30–300 ppm | Grinding, honing and heavy machining of ferrous metals |
| Syntilo 9828 | 4–10 % | see data sheet | 15–200 ppm | Aerospace aluminium alloys and composites |
| Syntilo 9904 | 4–10 % | 1.9 | 0–300 ppm | All grinding types, honing, gear hobbing |
| Syntilo 9930 | 4–8 % | 2.3 | 0–400 ppm | Grinding; light machining of cast iron and low-carbon steel |
| Syntilo 9954 (this page) | 4–15 % | 1.4 | 15–255 ppm | Grinding and heavy machining of ferrous metals |
| Syntilo CR 4 | 5–6 % | 1.4 | 45–300 ppm | Carbide grinding without cobalt release |
| Syntilo NF | 1.5–3 % | 2.4 | stable at 500 ppm | Nitrite-free; cast iron grinding and machining |
Not sure between a soluble, a synthetic and a neat oil? Read how to choose a cutting fluid.
Castrol lists 4–15 %. Check the sump with a refractometer using a factor of 1.4.
No, it contains boron per the Castrol catalogue.
Synthetic coolant for grinding and heavy machining of ferrous metals.
Castrol lists 15–255 ppm for Syntilo 9954. Test your water before you mix: borewell water in Andhra Pradesh and Telangana is often hard. If your water falls outside this range, mix with treated water or choose a grade whose range fits, using the comparison table on this page.
Common grades are held at our IDA Mallapur warehouse in Hyderabad and at Bhimavaram; other grades are indented from Castrol India, and the dispatch date is confirmed on the quotation. Batch COA, TDS and MSDS are supplied on request.
Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.
Request a Quote WhatsApp UsSyntilo NF · Syntilo CR 4 · Syntilo 2000 · Syntilo 9828 · Syntilo 9904 · Syntilo 9930
Range page: Castrol metalworking fluids · all metalworking coolants · guide: coolant sump life · for the same machines: slideway oils, spindle oils · cutting fluid selection guide