Castrol Syntilo 9930 — Synthetic Water-Soluble Coolant

Synthetic for surface, cylindrical, double-disc and centreless grinding, also milling, turning, boring and light drilling on cast iron and low-carbon steel. Supplied across Andhra Pradesh and Telangana.

Request a QuoteWhatsAppPacks: Barrels (210 L)

What Syntilo 9930 is

Castrol Syntilo 9930 is a synthetic for surface, cylindrical, double-disc and centreless grinding, also milling, turning, boring and light drilling on cast iron and low-carbon steel. As a synthetic it forms a clear solution rather than a milky emulsion, which keeps the work zone visible and flushes fine grinding swarf well.

Typical use concentration is 4–8 %, in water of 0–400 ppm hardness; the refractometer factor is 2.3.

Typical properties

PropertyTypical value
Mineral oil in concentrate0 %
BoronNo
pH, 5 % solution9.2
Solution appearancetransparent
Application concentration4–8 %
Refractometer factor2.3
Water hardness range0–400 ppm

Source: Castrol India industrial product catalogue (synthetic water-soluble coolants table). Typical values, not a specification.

Metals it suits

Where it is used

Synthetic or soluble oil?

Synthetics suit grinding and light-to-medium machining where cleanliness and visibility matter; soluble oils carry more lubricity for heavy cutting. See synthetic vs mineral coolants and the Hysol grades on the coolants page.

Packs and supply

Barrels (210 L). Batch COA, TDS and MSDS are supplied with every order on request.

Syntilo 9930 compared with other Syntilo grades

All values are typical figures from the Castrol India catalogue or the grade’s data sheet; the current data sheet is binding. Match the water hardness first, then the job.

GradeIn useRefractometer factorWater hardnessBest for
Syntilo 20002–20 %1.730–300 ppmGrinding, honing and heavy machining of ferrous metals
Syntilo 98284–10 %see data sheet15–200 ppmAerospace aluminium alloys and composites
Syntilo 99044–10 %1.90–300 ppmAll grinding types, honing, gear hobbing
Syntilo 9930 (this page)4–8 %2.30–400 ppmGrinding; light machining of cast iron and low-carbon steel
Syntilo 99544–15 %1.415–255 ppmGrinding and heavy machining of ferrous metals
Syntilo CR 45–6 %1.445–300 ppmCarbide grinding without cobalt release
Syntilo NF1.5–3 %2.4stable at 500 ppmNitrite-free; cast iron grinding and machining

Not sure between a soluble, a synthetic and a neat oil? Read how to choose a cutting fluid.

Frequently Asked Questions

What concentration should I run Syntilo 9930 at?

Castrol lists 4–8 %. Check the sump with a refractometer using a factor of 2.3.

Is Syntilo 9930 boron-free?

Yes, the Castrol catalogue lists it as boron-free.

What is Syntilo 9930 best used for?

Synthetic for surface, cylindrical, double-disc and centreless grinding, also milling, turning, boring and light drilling on cast iron and low-carbon steel.

What water hardness does Syntilo 9930 need?

Castrol lists 0–400 ppm for Syntilo 9930. Test your water before you mix: borewell water in Andhra Pradesh and Telangana is often hard. If your water falls outside this range, mix with treated water or choose a grade whose range fits, using the comparison table on this page.

Can I get Syntilo 9930 quickly in Hyderabad or Andhra Pradesh?

Common grades are held at our IDA Mallapur warehouse in Hyderabad and at Bhimavaram; other grades are indented from Castrol India, and the dispatch date is confirmed on the quotation. Batch COA, TDS and MSDS are supplied on request.

Request a quotation

Share your application details, quantities and pack sizes — we will respond with a tailored recommendation and pricing within 24 hours on working days.

Request a Quote WhatsApp Us

Other Syntilo synthetic coolants

Syntilo NF · Syntilo CR 4 · Syntilo 2000 · Syntilo 9828 · Syntilo 9904 · Syntilo 9954

Related

Range page: Castrol metalworking fluids · all metalworking coolants · guide: coolant sump life · for the same machines: slideway oils, spindle oils · cutting fluid selection guide